Software
|
Catalyst 9130AXI
● Cisco Unified Wireless Network Software Release 8.10.x or later
● Cisco IOS XE Software Release 16.12.1 with AP Device Pack, or later
Catalyst 9130AXE
● Cisco Unified Wireless Network Software Release 8.10 MR1 or later
● Cisco IOS XE Software Release 17.1.1 or later
Cisco Catalyst 9130AXE Stadium Antenna Access Point, external antenna (C-ANT9104)
● Cisco IOS XE Software Release 17.6.1 or later
|
Supported wireless LAN controllers
|
● Cisco Catalyst 9800 Series Wireless Controllers
● Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller
Note: C9130AXE-STA-x is not supported on AireOS controllers
|
802.11n version 2.0 (and related) capabilities
|
● 4x4 MIMO with four spatial streams
● Maximal Ratio Combining (MRC)
● 802.11n and 802.11a/g
● 20- and 40-MHz channels
● PHY data rates up to 1.5 Gbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
● Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)
● 802.11 Dynamic Frequency Selection (DFS)
● Cyclic Shift Diversity (CSD) support
|
802.11ac
|
● 8x8 downlink MU-MIMO with eight spatial streams
● MRC
● 802.11ac beamforming
● 20-, 40-, 80-, and 160-MHz channels
● PHY data rates up to 3.4 Gbps (8x8 80 MHz or Dual 4x4 80+80 MHz on 5GHz)
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
● 802.11 DFS
● CSD support
● Wi-Fi Protected Access (WPA) 3 support
|
802.11ax
|
● 8x8 uplink/downlink MU-MIMO with eight spatial streams
● Uplink/downlink OFDMA
● TWT
● BSS coloring
● MRC
● 802.11ax beamforming
● 20-, 40-, 80-, and 160-MHz channels
● PHY data rates up to 5.38 Gbps (8x8 80 MHz or Dual 4x4 80+80 MHz on 5GHz and 4x4 20 MHz on 2.4)
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
● 802.11 DFS
● CSD support
● WPA3 support
|
Integrated antenna
|
● 2.4 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth
● 5 GHz: Peak gain 6 dBi, internal antenna, omnidirectional in azimuth
|
External antenna with smart antenna connector
|
● The Cisco Catalyst 9130AXE Access Point is certified for use with antenna gains up to 13 dBi (2.4 GHz and 5 GHz)
● Cisco offers the industry's broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios
● Supports Self-Identifiable Antennas (SIA) on the smart antenna connector
● Smart antenna connector is a compact multi-RF connector with 8-DART interface
● Requires the AIR-CAB002-D8-R= 2 ft smart antenna connector when used with antennas with a RP-TNC connector
● Requires the AIR-CAB003-D8-N= 3 ft smart antenna connector when used with AIR-ANT2513P4M-N= antenna
|
Interfaces
|
● 1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ-45)
● Management console port (RJ-45)
● USB 2.0 at 4.5W
|
Indicators
|
● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
|
Dimensions (W x L x H)
|
● Access point (without mounting brackets):
◦ C9130AXI: 8.9 x 8.9 x 1.88 in. (22.6 x 22.6 x 4.8 cm)
◦ C9130AXE: 9.17 x 9.17 x 1.58 in. (23.3 x 23.3 x 4.0 cm)
◦ C9130AXE-STA: 18.2 X 23.5 X 5.8 in. (59.70 X 46.23 X 14.8 cm)
|
Weight
|
Cisco Catalyst 9130AXI
● 3.2 lb. (1.45 kg)
Cisco Catalyst 9130AXE
● 3.78 lb. (1.71 kg)
Cisco Catalyst 9130AXE-STA
● 15.5 lbs (7.03 Kg)
|
Input power requirements
|
● 802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE)
● Cisco power injector, AIR-PWRINJ6=
● 802.3af PoE
● Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af)
|