logo

Catalyst 9162I access point

Mã sản phẩm: Catalyst 9162I access point
Tình trạng: Còn
Giá: Liên hệ
Lượt xem: 165
Liên hệ tư vấn 0888.222.070 
 

With the flexibility to choose between cloud and on-premises management, the Catalyst 9162 Series Access Points help protect your network investment and unlock the power of hybrid work. The Wi-Fi 6E-compliant access points take advantage of the 6-GHz band expansion to produce a network that is more reliable and secure, with higher throughput, more capacity, and less device interference. They come with three 2x2 radios and provide a host of cutting-edge features.

The Catalyst 9162 Series joins the industry’s leading network architecture (Catalyst) with the industry’s leading cloud IT platform (Meraki), for an unparalleled network experience. Organizations that need solutions to power hybrid work and allow their people to work anywhere at any time with elevated, secure, and connected experiences will find that the 9162 Series is the best choice.

With the Catalyst 9162 Series, you can change your network management whenever you want. For example, you can start with an on-premises deployment and later change to cloud-based management without the need to purchase and redistribute additional hardware.

Thông số kỹ thuật

Software

  Cisco IOS XE Software Release 17.9.2/17.10.1 or later

Supported wireless controllers

  Cisco Catalyst 9800 Series Wireless Controllers (physical or virtual)

802.11n version 2.0 (and related) capabilities

  2x2 MIMO with two spatial streams
  Maximal Ratio Combining (MRC)
  802.11n and 802.11a/g
  20- and 40-MHz channels
  PHY data rates up to 444.4 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
  Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)
  802.11 Dynamic Frequency Selection (DFS)
  Cyclic Shift Diversity (CSD) support

802.11ac

  2x2 downlink MU-MIMO with two spatial streams
  MRC
  802.11ac beamforming
  20-, 40-, and 80-MHz channels
  PHY data rates up to 866.7 Mbps (2x2 80 MHz on 5 GHz)
  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
  802.11 DFS
  CSD support
  Wi-Fi Protected Access (WPA) 3 support

802.11ax

  2x2 uplink/downlink MU-MIMO with two spatial streams (6 GHz)
   2x2 downlink MU-MIMO with two spatial streams (2.4 GHz and 5 GHz)
  Uplink/downlink OFDMA
  TWT
  BSS coloring
  MRC
  802.11ax beamforming
  20-, 40-, 80-, and 160-MHz channels (6 GHz)
  20-, 40-, and 80-MHz channels (5 GHz)
  20-MHz channels (2.4 GHz)
  PHY data rates up to 3.9 Gbps (2x2 160 MHz on 6 GHz, 2x2 80 MHz on 5 GHz, and 2x2 20 MHz on 2.4 GHz)
  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
  802.11 DFS
  CSD support
  WPA3 support

Integrated antenna

  2.4 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth
  5 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth
  6 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth

Interfaces

  1x 100M/1000M/2.5G Multigigabit Ethernet (RJ-45) port
  Management console port (RJ-45)
  USB 2.0 at 4.5W

Indicators

  Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors

Dimensions
(W x L x H)

  Access point (without mounting brackets):

    7.8 x 7.8 x 1.7 in. (200 x 200 x 44.45 mm)

Weight

  2.05 lb. (0.93 kg)

Input power requirements

  802.3bt, Cisco Universal PoE (Cisco UPOE), 802.3at Power over Ethernet Plus (PoE+)
  Cisco power injectors: AIR-PWRINJ7=, AIR-PWRINJ6=, MA-INJ-6
  802.3af PoE (for 802.3af, see the matrix below for radio configuration)
  DC power input (12V/ MA-PWR-30W)

Sản phẩm cùng nhóm